Showing all 11 results
Many derailleur chains use a master link that allows the chain to be installed and removed by hand. While this type of masterlink doesn’t require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. MLP-1.2 Master Link Pliers make removal and replacement of these masterlinks quick and…
To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checkers pins into two links, press the swing arm gauge tight, and then check…
This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and super strong replaceable pin make chain removal and installation a breeze.
This SRAMRear Derailleur Chaingap Adjustment Guide is indispensable for setting up SRAM 12-speed derailleurs. Compatible with SRAM Eagle 50T and 52T, mechanical and AXS.
The CTP-4K includes four (4) replacement chain tool pins and one 5/32″ ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap.
Park Tool CT-12357 Chain Tool Pin – Bag of 2. Replacement pins for Park Chain tools. Durable and high quality
The Park Tool CC-4 Chain Checker is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of determining when chain replacement is necessary. The tool works…
The Park Tool CT-3.3 is a professional quality shop chain tool that works on 5-speed to 12-speed road and mountain bike derailleur chains, including SRAM AXS 12-speed, as well as 1/8″, 3/16″, and half link chains. Featuring an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built…
Park Tool CC-4.2 Chain Checker Tool. A worn bicycle chain can cause poor shifting and expensive drivetrain damage. The Park Tool CC-4.2 Chain Checker is a drop-in gauge that measures chain wear accurately. It contacts the chain in three places eliminating guesswork. Compatible with 5 to 13-speed and single-speed chains it indicates wear at 0.5%…
Chain Tool Pin for CT2, CT-3, CT-5 and CT-7. Made from hardened alloy tool steel.
A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3.2 is a go/no-go gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings. Works on all 1/2″ pitch…
Yokozuna Brake Casing - Red
1 × $12.00 
MT5 Next Disc Brake
1 × $20.00 Subtotal: $32.00
